Posted by Circuits Arena on Tuesday, 12 April 2016
Universal Battery Tester ckt diagram is the artlcle explaining Universal Battery Tester ckt diagram To recognize the battery whether it is working or not is very difficult. Generally voltmeter is em...
Universal Battery Tester ckt diagram
To recognize the battery whether it is working or not is very difficult.
Generally voltmeter is employed for checking purpose of state of
battery. Now, here is very simple circuit utilized to check the state of
battery.
Circuit Description
The entire circuit of universal battery tester is build around dual
comparator IC TL072 (IC1) followed by other component. The two
independent comparator is used here as operational amplifier. The
inverting pin of these two operational amplifiers is fed through
potential divider network made from resistor R1 and R3. Rest of the
component is utilized to maintain threshold voltage.
State of LED
Glowing RED LED:- Battery is fully charged
Glowing GREEN LED:- Battery is usable
Glowing RED LED:- Need charge or it is not usable.
PARTS LIST
Resistors (all ¼-watt, ± 5% Carbon unless stated otherwise)
R1, R3 = 5.6 Ω
R2 = 3.3 KΩ
R4, R6 = 1 MΩ
R5, R7, R9 = 1 KΩ
R8, R10 = 820 Ω
R11 = 10 KΩ
Semiconductors
IC1 = TL072CD
ZD1 = 3.3 V/500mW
LED1 = RED LED
LED2 = GREEN LED
LED3 = YELLOW LED
Miscellaneous
SW1 = Push to on switch
Two probe
