Posted by Circuits Arena on Monday, 30 January 2017
B.Tech Projects for ECE and EEE Engineering Students is the artlcle explaining B.Tech Projects : B.Tech EEE Projects,EEE Final Year Projects for Stedents 1. Human Speed Detection Project by using 8051 series ...
B.Tech Projects:
B.Tech EEE Projects,EEE Final Year Projects for Stedents
The main objective of this project is to detect the speed of humans. Therefore this system is very beneficial in the sports areas. In order to record the speed of humans, this system uses a handheld radar gun pointing at the person whose speed is to be detected.
A tachometer is basically used to measure angular speed of a motor. It can be mechanical device with a warm gear and spindle arrangement or a electrical device which converts the angular speed into electrical signal.
The circuit given here is substitute of old mechanical traffic-light controllers which are not reliable. The circuit’s timing and sequential operation are done by two CMOS ICs (IC1 and IC2) while the actual power switching is done by triacs.
This project aims to build a multi-robot system as advancement to a single robot system to achieve the complex and inter-dependable tasks. In this, a group of smaller robots (slaves) coordinates between themselves while receiving instructions from master robot to achieve a complex task.
This Project uses Ultrasound to measure distance. Measured distance is
displayed on LCD. You can use this digital output data in making many
interesting projects such as accident proof vehicle or Robots, object
identifier, Sonar.
A Line Follower Robot system contains sensors, control systems, manipulators, power supplies and software all working together to perform an assigned task.
DTMF based robotic vehicle circuit consists of DTMF decoder IC, driver IC l293D IC and motors. DTMF decoder IC used is HT9107B. It has 18 pins. Tone from DTMF encoder is given to the DTMF decoder IC.
LogicCircuit – is free, open source educational software for designing and simulating digital logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy.
Here is a simple project more useful in watering plants automatically without any human interference. We may call it as Automatic plant irrigation system. We know that people do not pour the water on to the plants in their gardens when they go to vacation or often forget to water plants.
This project implements the 3D LED cube display that demonstrates the capabilities of 3D displaying of objects over 2D representation. Preprogrammed microcontroller with stored patterns decides the group of LED’s or LED to light next.
